User Manual

A list of Types and Messages from Center V2 will be displayed:
Type Message
Motion Camera detected motion
Trigger
I/O Trigger; Module xx Trigger Resume; Video of Camera xx
(By: Module xx)
Connection
Video Lost; Module Lost; The network connection is lost; The
connection of (client xx) is abnormal; Camera cannot be
controlled; Ping Timeout; Failed to establish the connection;
Video signal of Camera xx has resume; Module xx has returned
to normal; Failed to Login SMS Server; Failed to send short
message; SMS Server is shutdown.
Alarm
There isn't enough space for recording; There isn't enough
space for recording; The storage for Event Log is low, Event
Log will not take any new entries; An unexpected error occurred
in Multicam Surveillance System (Error Code: 1 or 2); There is
an intruder; Object Missing; Unattended Object; Alert Message
of POS.
Attachment Record file of Camera xx [Live, Attachment or offline].
System
Start Recycle; Recycle Event Log; Status change of monitoring
cameras. On: (camera no.) Off: (camera no.) / (By Schedule);
Stop all cameras monitoring; Start all cameras monitoring; Start
I/O Monitoring. / (By Schedule); Stop I/O Monitoring. / (By
Schedule); Schedule Start; Schedule Stop. All monitoring
devices are stop too; Start monitoring all type events; Stop
monitoring all type events; Subscriber session is not
established. Wait-time expired; Unexpected logout before
subscriber session is completed.
Note: Error Code 1 indicates a codec error; Error Code 2 indicates that
users can’t write or record any data due to HD failure or user privilege.
138