User Manual

Appendix
E. PTZ Control Using GV-Joystick V2
You need to run the following program in the background when using the
GV-Joystick V2 to control PTZ. For details on the GV-Joystick V2 operations,
see GV-Joystick V2 User’s Manual.
 Center V2
You can control the PTZ cameras using GV-Joystick in Camera/Audio
Control (see Figure 1-28). Up to 8 GV-Joystick V2 can be connected to
control the PTZ cameras.
1. Run mcamctrl.exe from the program folder. This dialog box appears.
Figure E-1
2. For the connected GV-Joystick V2, select GeoVision Joystick from
the Device drop-down list.
3. Click the Start Service button ►(Figure D-1) and then you can use
the GV-Joystick V2 to control the PTZ camera.
4. If more than one GV-Joystick V2 is connected, repeat Step 2 to set up
and use another GV-Joystick V2.
211