User Manual
Table Of Contents
- GV-CMS Series User's Manual V14.10
- Copyright
- Contents
- Preface
- Naming and Definition
- Chapter 1 Center V2
- 1.1 Minimum System Requirements
- 1.2 Installation
- 1.3 The Center V2 Window
- 1.4 Subscriber Account
- 1.5 Connecting to Center V2
- 1.6 Live View
- 1.7 Recording
- 1.8 Playback
- 1.9 Two-Way Audio
- 1.10 Advanced Monitoring and Management
- 1.11 Subscriber Schedule
- 1.12 Alarm Report
- 1.13 Event List
- 1.14 Event Log Browser
- 1.15 System Configuration
- 1.16 Notification Settings
- 1.17 Output Alerts
- 1.18 SMS Alerts
- 1.19 E-Mail Alerts
- 1.20 E-Map Alerts
- 1.21 Event Chart
- 1.22 Failover Server
- 1.23 Assigning a Subscriber to Another Center V2
- 1.24 Channel Display on Another Monitor
- Chapter 2 Dispatch Server
- 2.1 Minimum System Requirements
- 2.2 Installation
- 2.3 The Dispatch Sever Window
- 2.4 Subscriber Account
- 2.5 Service Startup
- 2.6 Connecting Center V2 to Dispatch Server
- 2.7 Connecting to Dispatch Server
- 2.8 Connecting GV-IP Device to Dispatch Server
- 2.9 Setting a Primary Center V2 Server
- 2.10 Event Query
- 2.11 Event List
- 2.12 Subscription Schedule
- 2.13 Live View
- 2.14 Log Browser
- 2.15 System Configuration
- 2.16 SMS Alerts
- 2.17 E-Mail Alerts
- 2.18 Event Chart
- 2.19 Failover Server
- Chapter 3 Vital Sign Monitor
- 3.1 Minimum System Requirements
- 3.2 Installation
- 3.3 The Vital Sign Monitor Window
- 3.4 Subscriber Account
- 3.5 Service Startup
- 3.6 Connection to Vital Sign Monitor
- 3.7 Subscriber Monitoring
- 3.8 Subscriber Schedule
- 3.9 Alarm Report
- 3.10 Remote Playback
- 3.11 Event List
- 3.12 Event Log Browser
- 3.13 System Configuration
- 3.14 Output Alerts
- 3.15 SMS Alerts
- 3.16 E-Mail Alerts
- 3.17 Temperature Alarm
- 3.18 Event Chart
- 3.19 Failover Server
- Appendix
- A. Dongle Description
- B. Upgrading the Black Dongle
- C. Fast Backup and Restoration
- D. Watermark Proof
- E. PTZ Control Using GV-Joystick V2
- F. Image Size on Center V2
- G. UPnP Settings
- H. Supported IP Device Brands and Protocols
- I. MultiLang Tool for Translated Text
- J. Specifications
- K. Installing Net. Framework 3.5 for Windows Server 2012 and Windows 8
[Other]
Allow Center V2 to Get System Information: Allows Center V2 to
get system information on your GV-System / GV-VMS.
Send Alert Message of POS’s Loss Prevention to Center V2:
Notifies Center V2 about the events of POS Loss Prevention. Note
this option is only supported by GV-System
Time synchronization with Center V2: Enables the time
increment/decrement of minutes and seconds at the subscriber site to
match the time at the Center V2.
Notify Center V2 when the storage space was full: Notifies the
Center V2 when the subscriber’s storage space is insufficient.
Notify Center V2 when Wiegand Event occurs: This option is
designed for the access control application with GV-Wiegand Capture.
When the GV-System / GV-VMS receives the card number from
GV-Wiegand Capture, the number can also be sent to the Center V2.
Note this option is only supported by GV-System
Note: When Time synchronization with Center V2 is selected, the
function of time synchronization will be activated as soon as the Center
V2 is started up, and it will be re-activated every 12 hours.
I/O Device
The settings define which I/O condition to notify Center V2. To configure
these settings, first disable the Monitor all type events option in Figure
1-10. Note this tab is only accessible when one or more I/O device is
installed to GV-System / GV-VMS.
28