User Manual

Center V2 1
On the Subsc
riber List (No. 4, Figure 1-2), right-click one online subscriber,
and select Show I/O Status to display this window.
Figure 1-32
[Module] Shows the module’s I/O status.
[Input] Shows the input device status. The blue icon indicates the input is
deactivated; the red lightening icon indicates the input is activated.
[Output] Shows the output device status or to manually force an output or
reset an output installed at the subscriber site.
To manually force an output to be triggered, click a desired output and click
the Force Output button. Or select a desired output pin and click the
Force Output button. To reset an output, click a desired output pin and
select Reset. Or click the Reset Output button and select the desired
module and output pin.
49