Installation Guide

Table Of Contents
92
1. Unpack the camera body.
A. B.
C. D.
2. Thread the camera cable through the back cover and into the power box and secure the
back cover to the power box with self-prepared screws.
3. Follow steps 1B to 1D to assemble the camera.
4. Refer to the indicated sections of the manuals on the software DVD:
A. Access live view. See Accessing the Live View, Getting Started Chapter, GV-IPCam
H.264 Firmware Manual.
B. Adjust the angle, focus and zoom of the camera. See steps 9 and 10 in Hard-Ceiling
Mount, Vandal Proof IP Dome (Part I) Chapter, GV-IPCam H.264 Hardware
Manual - VD.
C. Secure the thread lock, replace the silica gel bag and secure the housing cover. See
steps 11 to 13 in Hard-Ceiling Mount, Vandal Proof IP Dome (Part I) Chapter,
GV-IPCam H.264 Hardware Manual - VD.