Installation Guide

Table Of Contents
Installing the Vandal Proof IP Dome (Part II)
3
5. Secure the camera to the wall mount bracket with the supplied torx wrench.
6. Connect camera wires with wires from the wall.
7. Secure the plates to the wall with 8 self-prepared screws.
8. Refer to the indicated sections of the manuals on the software DVD:
A. Access live view. See Accessing the Live View, Getting Started Chapter, GV-IPCam
H.264 Firmware Manual.
B. Adjust the angle, focus and zoom of the camera. See step 9 in Installation, Vandal
Proof IP Dome (Part II) Chapter, GV-IPCam H.264 Hardware Manual - VD.
C. Replace the silica gel bag and secure the housing cover. See step 10 in Installation,
Vandal Proof IP Dome (Part II) Chapter, GV-IPCam H.264 Hardware Manual - VD.
Note: You can use a corrugated tube to waterproof the cable.
117