Installation Guide

Table Of Contents
6. Secure the camera to the back plate with the supplied torx wrench.
7. Connect camera wires with wires from the pole.
8. Secure the mounting bracket to the pole using 3 steel straps (GV-Mount400 /
GV-Mount410, No. 2). Rotate the screw on the strap to adjust its size.
9. Refer to the indicated sections of the manuals on the software DVD:
A. Access live view. See Accessing the Live View, Getting Started Chapter,
GV-IPCam H.264 Firmware Manual..
B. Adjust the angle, focus and zoom of the camera. See step 9 in Installation, Vandal
Proof IP Dome (Part II) Chapter, GV-IPCam H.264 Hardware Manual - VD.
C. Replace the silica gel bag and secure the housing cover. See step 10 in Installation,
Vandal Proof IP Dome (Part II) Chapter, GV-IPCam H.264 Hardware Manual -
VD.
130