Installation Guide

ManualsBrandsGeovision ManualsElectronicsGV-Mount 501 Convex Corner Box Mount

161

162

163

164

165

166

167

168

169

170

Table Of Contents

Contents
Installation Overview
Required Accessories
Note for Installing Camera Outdoor
Note for Adjusting Focus and Zoom
Note for Supported Power Box Types
Note for IP LPR Camera
1. Introduction
- 1.1 Accessories List
- 1.2 Dimensions
- 1.3 Packing Lists
2. Installing the Vandal Proof IP Dome (Part I)
- 2.1 Assembling the Vandal Proof IP Dome with the dome housing
- 2.2 Straight Tube Box Mount
- 2.3 Straight Tube Mount
- 2.4 Wall Mount
- 2.5 L-Shaped Wall Mount
- 2.6 Wall Box Mount
- 2.7 Wall Pendant Mount
- 2.8 Convex Corner Mount with Pendant Tube
- 2.9 Convex Corner Mount with Wall Bracket
- 2.10 Convex Corner Box Mount
- 2.11 Concave Corner Mount with Pendant Tube
- 2.12 Concave Corner Mount with Wall Bracket
- 2.13 Pole Mount with Pendant Tube
- 2.14 Pole Mount with Wall Bracket
- 2.15 Pole Box Mount
- 2.16 Power Box Mount
Note for Installing the Vandal Proof IP Dome
3. Installing the Vandal Proof IP Dome (Part II)
- 3.1 Straight Tube Box Mount
- 3.2 Straight Tube Mount
- 3.3 Wall Mount Bracket
- 3.4 L-Shaped Wall Mount
- 3.5 Wall Box Mount
- 3.6 Wall Pendant Mount
- 3.7 Convex Corner Mount with Pendant Tube
- 3.8 Convex Corner Mount with Wall Bracket
- 3.9 Convex Corner Box Mount
- 3.10 Concave Corner Mount with Pendant Tube
- 3.11 Concave Corner Mount with Wall Bracket
- 3.12 Pole Mount with Pendant Tube
- 3.13 Pole Mount with Wall Bracket
- 3.14 Pole Box Mount
- 3.15 Power Box Mount
- 3.16 In-Ceiling Mount
4. Installing the Fixed IP Dome
- 4.1 Basic Installation
- 4.2 Straight Tube Box Mount
- 4.3 Straight Tube Mount
- 4.4 Wall Mount
- 4.5 L-Shaped Wall Mount
- 4.6 Wall Box Mount
- 4.7 Wall Pendant Mount
- 4.8 Convex Corner Mount
- 4.9 Convex Corner Box Mount
- 4.10 Concave Corner Mount
- 4.11 Pole Mount
- 4.12 Pole Box Mount
- 4.13 Power Box Mount
5. Installing the Fisheye Camera
- 5.1 Assembling the Fisheye Camera with the Dome Housing
- 5.2 Straight Tube Box Mount
- 5.3 Straight Tube Mount
- 5.4 Wall Mount Bracket
- 5.5 Wall Pendant Mount
- 5.6 Tilting Wall Mount
- 5.7 Convex Corner Mount
- 5.8 Convex Corner Box Mount
- 5.9 Concave Corner Mount
- 5.10 Pole Mount
- 5.11 Pole Box Mount
- 5.12 Power Box Mount
6. Installing the GV-IP Speed Dome
- 6.1 Assembling Outdoor IP Speed Dome with Pendant Tube
- 6.2 In-Ceiling Mount6.2.1 GV-SD220
- 6.2.2 GV-SD220-S / GV-SD2300
- 6.3 Straight Tube Box Mount 6.3.1 GV-SD220-S / GV-SD2300
- 6.3.2 GV-SD2301 / GV-SD2411
- 6.4 Straight Tube Mount6.4.1 GV-SD220-S / GV-SD2300
- 6.4.2 GV-SD2301 / GV-SD2411
- 6.5 Convex Corner Mount
- 6.6 Convex Corner Box Mount
- 6.6.1 GV-SD220-S / GV-SD2300
- 6.6.2 GV-SD2301 / GV-SD2411
- 6.7 Concave Corner Mount
- 6.8 Pole Mount
- 6.9 Pole Box Mount
- 6.9.2 GV-SD2301 / GV-SD2411
Note for Closing the Bullet Camera Cover
7. Installing the Bullet / Target Bullet / IP LPR Camera
- 7.1 Convex Corner Mount
- 7.2 Concave Corner Mount
- 7.3 Pole Mount
Note for Installing the Box Camera
8. Installing the Box Camera
- 8.1 Assembling Box Camera with the Housing Box
- 8.2 Convex Corner Mount
- 8.3 Concave Corner Mount
- 8.4 Pole Mount
9. Installing the Arctic Box / IP LPR Camera
- 9.1 Convex Corner Mount
- 9.2 Concave Corner Mount
- 9.3 Pole Mount
10. Installing the Mini Fixed Dome
- 10.1 L-Shaped Wall Mount
- 10.2 Wall Box Mount
- 10.3 Wall Mount Bracket
- 10.4 Power Box Mount
11. Installing the Mini Fixed Rugged Dome
- 11.1 L-Shaped Wall Mount
- 11.2 Wall Box Mount
- 11.3 Wall Mount Bracket
- 11.4 Power Box Mount
12. Installing the Target (Mini) Fixed Dome
- 12.1 L-Shaped Wall Mount
- 12.2 Wall Box Mount
- 12.3 Wall Mount Bracket
- 12.4 Power Box Mount
- 12.5 GV-EFD2101 / EFD3101 In-Ceiling Mount
- 12.6 Assembling GV-EFD2101 / EFD3101 with Dome Housing
- 12.7 Wall Pendant Mount
- 12.8 Straight Tube Mount
- 12.9 Straight Tube Box Mount
- 12.10 Convex Corner Mount
- 12.11 Convex Corner Box Mount
- 12.12 Concave Corner Mount
- 12.13 Pole Mount
- 12.14 Pole Box Mount
13. Installing the Target Mini Fixed Rugged Dome
- 13.1 L-Shaped Wall Mount
- 13.2 Wall Box Mount
- 13.3 Wall Mount Bracket
- 13.4 Power Box Mount
14. Installing the Target Vandal Proof IP Dome
- 14.1 L-Shaped Wall Mount
- 14.2 Wall Mount Bracket
- 14.3 In-Ceiling Mount
- 14.4 Assembling Dome Housing
- 14.5 Wall Pendant Mount
- 14.6 Straight Tube Mount
- 14.7 Straight Tube Box Mount
- 14.8 Convex Corner Mount with Pendant Tube
- 14.9 Convex Corner Mount with Wall Bracket
- 14.10 Convex Corner Box Mount
- 14.11 Concave Corner Mount with Pendant Tube
- 14.12 Concave Corner Mount with Wall Bracket
- 14.13 Pole Mount
- 14.14 Pole Box Mount

3.16 In-Ceiling Mount

The thickness of the ceiling board must not exceed 4 cm (1.57 in).

Required accessories:

• GV-Mount914

1. Assemble the in-ceiling casing.

A. Secure two brackets (GV-Mount914, No. 1) to the in-ceiling plate (GV-Mount914, No.

2) with black screws (GV-Mount914, No. 3).

140