Installation Guide

Table Of Contents
Installing the Vandal Proof IP Dome (Part II)
3
4. Secure the back plate (standard package) to the in-ceiling plate using the round screws
(GV-Mount914, No. 6) and secure the safety lock (standard package). Align the arrow of
the back plate with the in-ceiling ring.
5. Connect the wires to the camera. For details, see steps 1 to 4, Installation, Vandal Proof
IP Dome (Part II) Chapter, GV-IPCam H.264 Hardware Manual - VD on the software
DVD.
6. Secure the camera to the back plate using the torx wrench (standard package).
7. Refer to the indicated sections of the manuals on the software DVD:
A. Access live view. See Accessing the Live View, Getting Started Chapter, GV-IPCam
H.264 Firmware Manual.
B. Adjust the angle, focus and zoom of the camera. See step 9 in Installation, Vandal
Proof IP Dome (Part II) Chapter, GV-IPCam H.264 Hardware Manual - VD.
143