Installation Guide

Table Of Contents
6.5 Convex Corner Mount
GV-SD220-S / GV-SD2300
GV-SD2301 / GV-SD2411
This installation method is only applicable to outdoor GV-IP Speed Dome.
Required accessories:
Pendant Tube (in outdoor IP Speed Dome standard package)
GV-Mount300
The user needs to prepare:
Screws for wall x 8
1. Assemble the camera with the pendant tube. See 6.1 Assembling Outdoor IP Speed
Dome with Pendant Tube.
2. Follow steps 3 to 5 in 5.7 Convex Corner Mount to assemble the mounting plates to the
camera and secure the camera to the wall. For GV-SD2301 and GV-SD2411, use the 45
mm M8 screws instead of the 30 mm M8 screws.
3. Connect the network, power and other cables to the camera. See 1.6 Connecting the
Camera, GV-IP Speed Dome User’s Manual on the software CD/DVD.
244