Installation Guide

Table Of Contents
Installing the GV-IP Speed Dome
255
6
2. Connect the supporting plate of GV-Mount501 to GV-Mount400 or GV-Mount410 by
fastening the 4 M8 30mm screws and plain washers (supplied with GV-Mount400 or GV-
Mount410), and fasten the 4 M8 (30 mm) screws and plain washers.
3. Follow steps 3 to 9 in 6.3.2 GV-SD2301 / GV-SD2411 to set up the cables and assemble
the junction box.
4. Follow steps 2 to 3-c in 6.1.2 GV-SD2301 / GV-SD2411 to connect the camera cables
and assemble the camera with the pendant tube.
5. Secure pendant tube onto the junction box with the 4 supplied M8 (30 mm) screws (GV-
Mount501, No. 5) and 4 plain washers (GV-Mount501, No. 9).
6. Secure the box cover by fastening the 2 screws at the corner with No. 6 torx wrench.