Installation Guide

Table Of Contents
2. Thread the camera cables from the wall through the pendant tube (GV-Mount200, No. 1),
and secure the pendant tube to the end of the housing cap (GV-Mount917, No. 2) with
M6 screws (GV-Mount917, No. 4).
3. Secure the wall pendant tube to the wall with 4 self-prepared screws.
4. Refer to the indicated sections of the manuals on the software DVD:
A. Connect the camera to power and network. See Connecting the Camera, Target
(Mini) Fixed Dome Chapter, GV-IPCam H.264 Hardware Manual - EFD.
B. Access the live view. See Accessing the Live View, Getting Started Chapter, GV-
IPCam H.264 Firmware Manual.
C. Based on the live view, adjust the pan and tilt angles and secure the housing cover.
See Installation, Target (Mini) Fixed Dome Chapter, GV-IPCam H.264 Hardware
Manual - EFD.
322