Data Sheet

Table Of Contents
Installing the Vandal Proof IP Dome (Part II)
3
5. Connect the camera wires with wires from the pole.
6. Secure the mounting bracket to the pole using 3 steel straps (GV-Mount400 /
GV-Mount410, No. 2). Rotate the screw on the strap to adjust its size.
7. Refer to the indicated sections of the manuals on the software DVD:
A. Access live view. See Accessing the Live View, Getting Started Chapter, GV-IPCam
H.264 Firmware Manual.
B. Adjust the angle, focus and zoom of the camera. See step 9 in Installation, Vandal
Proof IP Dome (Part II) Chapter, GV-IPCam H.264 Hardware Manual - VD.
C. Replace the silica gel bag and secure the housing cover. See step 10 in Installation,
Vandal Proof IP Dome (Part II) Chapter, GV-IPCam H.264 Hardware Manual - VD.
133