Data Sheet

Table Of Contents
Installing the Vandal Proof IP Dome (Part II)
3
2. Thread the wires into the camera. See steps 1 to 4 in Installation, Vandal Proof IP Dome
(Part II) Chapter, GV-IPCam H.264 Hardware Manual - VD on the software DVD.
3. Secure the camera to the back plate with the supplied torx wrench.
4. Refer to the indicated sections of the manuals on the software DVD:
A. Access live view. See Accessing the Live View, Getting Started Chapter, GV-IPCam
H.264 Firmware Manual.
B. Adjust the angle, focus and zoom of the camera. See step 9 in Installation, Vandal
Proof IP Dome (Part II) Chapter, GV-IPCam H.264 Hardware Manual - VD.
C. Replace the silica gel bag and secure the housing cover. See step 10 in Installation,
Vandal Proof IP Dome (Part II) Chapter, GV-IPCam H.264 Hardware Manual - VD.
139