Data Sheet

Table Of Contents
Installing the Fixed IP Dome
4
1. Assemble the camera with the dome housing. See 4.1.1 Assembling the Fixed IP Dome
with the Dome Housing.
2. Thread the necessary cables and wires from the ceiling through the mounting bracket
(GV-Mount101, No. 1) and secure the bracket to the ceiling with 4 self-prepared screws.
Ethernet
Or
Power
3. Assemble the tube (GV-Mount101, No. 2) and the tube connector (GV-Mount101, No. 3).
4. Thread the cables and wires into the tube, assemble the tube to the pendant mount
bracket and tighten the torxes with the supplied torx wrench (GV-Mount101, No. 4).
5. Thread the cables and wires into the dome housing and connect the network, power and
other cables. See Connecting the Camera, Fixed IP Dome Chapter, GV-IPCam H.264
Hardware Manual- FD on the software DVD.
153