Data Sheet

Table Of Contents
Installing the Target Vandal Proof IP Dome
14
2. Thread the camera cables from the wall through the pendant tube (GV-Mount200, No. 1),
and secure the pendant tube to the end of the housing cap (GV-Mount903, No. 2) with
M6 screws (GV-Mount903, No. 4).
3. Secure the wall pendant tube to the wall with 4 self-prepared screws.
4. Refer to the indicated sections of the manuals on the software DVD:
A. Connect the camera to power and network. See Connecting the Camera, Target
Vandal Proof IP Dome Chapter, GV-IPCam H.264 Hardware Manual - EVD.
B. Access the live view. See Accessing the Live View, Getting Started Chapter, GV-
IPCam H.264 Firmware Manual.
C. Based on the live view, adjust the pan and tilt angles and secure the housing cover.
See step 10 in Installation, Target Vandal Proof IP Dome Chapter, GV-IPCam H.264
Hardware Manual – EVD.
359