Data Sheet

Table Of Contents
4. Unpack the camera body.
A. B.
C. D.
5. Align and secure the back cover to the wall mount bracket with four M5 screws (GV-
Mount909, No. 5).
6. Thread the cable through the back cover and wall mount bracket, and follow step 4C and
4D to secure the camera to the back cover.
7. Refer to the indicated sections of the manuals on the software DVD:
A. Access live view. See Accessing the Live View, Getting Started Chapter, GV-IPCam
H.264 Firmware Manual.
B. Adjust the angle, focus and zoom of the camera. See steps 9 and 10 in Hard-Ceiling
Mount, Vandal Proof IP Dome (Part I) Chapter, GV-IPCam H.264 Hardware Manual
- VD.
C. Secure the thread lock, replace the silica gel bag and secure the housing cover. See
steps 11 to 13 in Hard-Ceiling Mount, Vandal Proof IP Dome (Part I) Chapter, GV-
IPCam H.264 Hardware Manual - VD.
66