Quick Installation Guide

4. Click the Arrow button

next to Storage to specify where to store the recorded videos

and adjust the recycle threshold.

5. You can set different recording frame rates for motion and non-motion recordings. In

Round-the-Clock mode, the camera will use the frame rate setting in 5a for non-motion

events and 5b for motion events.

a. Define non-motion events as General or Urgent Event under Video Record Frame

Rate.

b. For motion events, click the arrow button

next to Record Type and define motion

events as General or Urgent Event under Video record frame rate.

The frame rate for General Event and Urgent Event can be defined in the camera’s

General Setting dialog box (Figure 3-4). Normally, you would set a higher frame rate for

Urgent Events (Ex: full frame) and a lower frame rate for General Events (Ex: key frame

only).

Note:

1. Refer to [General Setting], Section 3.2 of this Quick Start Guide for setting the frame

rate for General Event and Urgent Event.

2. By default, the recording mode is set to Motion Detection and the Recycle function is

enabled with the Recycle Threshold set to 32 GB.

For details on Motion Detection settings, see Setting Up Motion Detection, Chapter 1, GV-

VMS User’s Manual.