User Manual
Table Of Contents
- Important Notes
- Contents
- Chapter 2
- Chapter 3
- Video Analysis
- 3.1 Object Counting and Intrusion Alarm
- 3.2 Object Index
- 3.3 Automatic Video Snapshots
- 3.4 Face Detection
- 3.5 Face Count
- 3.6 Privacy Mask Protection
- 3.7 Panorama View
- 3.8 Video Defogging
- 3.9 Video Stabilization
- 3.10 Wide Angle Lens Dewarping
- 3.11 Advanced Motion Detection
- 3.12 Crowd Detection
- 3.13 Advanced Scene Change Detection
- 3.14 Advanced Unattended Object Detection
- 3.15 Advanced Missing Object Detection
- 3.16 Text Overlay
- 3.17 Fisheye View
- 3.18 Specifications
- Video Analysis
- Chapter 4
- Chapter 5
- Chapter 6
- Chapter 7
- Chapter 8
- Chapter 9
- Useful Utilities
- 9.1 Dynamic DNS
- 9.2 Watermark Viewer
- 9.3 Windows Lockup
- 9.4 Authentication Server
- 9.5 Fast Backup and Restore
- 9.6 Bandwidth Control Application
- 9.7 Language Setting
- 9.8 Skype Video Utility
- 9.9 GV-SDSyncCard Utility
- Useful Utilities
118
3. Configure the Face Detection settings.
Figure 3-21
A. Select one camera from the drop-down list.
B. Optionally configure the Mask Filter, Storage and Noise Tolerance settings. For details, see
step 4, Setting Object Index earlier in this chapter.
C. From the Setup section, select Face Detection.
D. Click […] after Face Detection to adjust the sensitivity. The higher the value, the more sensitive
face detection is.
4. To configure another camera, repeat step 2 and select a different camera.
5. Click OK.
6. Start the monitoring.
Note:
1. For details on other settings of the Video Object Setup dialog box, see step 4, Setting Object
Index earlier in this chapter.
2. Optionally create a schedule for face detection to be enabled at certain times only. For details,
see Creating Schedules in Chapter 1.