User Manual
Table Of Contents
- Important Notes
- Contents
- Chapter 2
- Chapter 3
- Video Analysis
- 3.1 Object Counting and Intrusion Alarm
- 3.2 Object Index
- 3.3 Automatic Video Snapshots
- 3.4 Face Detection
- 3.5 Face Count
- 3.6 Privacy Mask Protection
- 3.7 Panorama View
- 3.8 Video Defogging
- 3.9 Video Stabilization
- 3.10 Wide Angle Lens Dewarping
- 3.11 Advanced Motion Detection
- 3.12 Crowd Detection
- 3.13 Advanced Scene Change Detection
- 3.14 Advanced Unattended Object Detection
- 3.15 Advanced Missing Object Detection
- 3.16 Text Overlay
- 3.17 Fisheye View
- 3.18 Specifications
- Video Analysis
- Chapter 4
- Chapter 5
- Chapter 6
- Chapter 7
- Chapter 8
- Chapter 9
- Useful Utilities
- 9.1 Dynamic DNS
- 9.2 Watermark Viewer
- 9.3 Windows Lockup
- 9.4 Authentication Server
- 9.5 Fast Backup and Restore
- 9.6 Bandwidth Control Application
- 9.7 Language Setting
- 9.8 Skype Video Utility
- 9.9 GV-SDSyncCard Utility
- Useful Utilities
I /O Applications
6
6.2.2 Moving PTZ Camera to Preset Points upon Input Trigger
This feature allows you to move the PTZ camera to preset points when an input is triggered. Select an
input number to be set up.
Figure 6-9
ime: Specify the amount of time the PTZ camera stays at
nging from 1 to
Preset Go by I/O: Enable the option and click the Arrow button to select your PTZ camera from
the drop-down list. Clicking the Finger button can apply the same settings to all inputs.
Alarm On: Moves the PTZ camera to a preset point when the input is triggered.
Alarm Off: Moves the PTZ camera to a preset point when the triggered input is off.
Preset Go by I/O - Alarm On Dwell T
“Alarm On” preset point, before returning to the “Alarm Off” preset point.
Note: Depending on the capability of the PTZ camera, up to 256 PTZ preset points (ra
256) and addresses (ranging from 0 to 255) can be programmed.
227