User Manual

24
1. In the Record Setting dialog box, click the Arrow button
next to Record Type. This dialog box
appears.
Figure 1-16
2. You can refine motion detection by setting Object Size or Region Sensitivity.
 Object Size: Limits motion detection to objects within a size range. Select User-defined.
Select Min. Object Size from the drop-down list and then drag an area on the image. Repeat
the process and set a Max. Object Size.
 Set Region Sensitivity: Sets different detection sensitivities for different parts of the camera
image. Uncheck User-defined, adjust the sensitivity level by moving the slider, and then drag
an area on the image. You can create several areas with different sensitivity levels. You can
use the Add Mask
and Cut Mask buttons to create irregular shapes. By default,
the entire image is set to the sensitivity level 9.
3. To ignore motions in a certain area, click Mask Region, and then drag an area on the image. You
can use the Add Mask
and Cut Mask buttons to create irregular shapes.