User Manual

46
1.6.5 System Idle Protection
When the computer is idle over a set period of time, the System Idle Protection can automatically log
out the administrator, and/or start monitoring.
1. Click Home
, select Toolbar , select Configure , select System Configure, and
select System Idle Protection Setting. This dialog box appears.
Figure 1-37
2. To automatically log out or switch to Startup Auto Login User, select Auto Logout or Switch to
Startup Login User if available, and then select the type of account to log out from the
drop-down list.
If you have set up a Startup Auto Login User, GV-VMS will switch to the Startup Login User instead
of logging out. The Startup Auto Login User is typically a user account with limited access rights.
For details, see Setting a Startup Auto Login User later in this chapter.
3. To automatically start monitoring, select Auto Monitoring, and use the drop-down list to select
Monitoring All, Schedule Monitoring, I/O Monitoring or Camera Monitoring. When Monitoring
All is selected, both I/O Monitoring and Camera Monitoring will be enabled.
 Select Auto Network Service of Startup Setting to enable network connections selected in
Startup Setting (WebCam Server, CenterV2, Vital Sign Monitor, Control Center Server,
Backup Server (GV-Failover Server and GV-Redundant Server) and/or Backup Center). To
specify which network connections to enable at startup, see Customizing Startup Settings
earlier in this chapter.