User Manual

IP Camera Setup
2
4. In the dialog box, configure the options which may vary depending on camera brands.
 Dual Streams: GV-IP Cameras are set to dual streams by default. Select this option to apply
the dual-streaming settings (lower resolution for live view and higher resolution for recording) if
the camera supports dual streams.
 Query: Detect and apply the current codec and resolution setting on the camera. This function
may not be available for some third-party cameras.
 Camera list: Select a camera number.
 Port: Modify the video streaming port number if necessary.
 Stream Type: You may have the option of Single Stream or Dual Streams depending on
camera models.
 Codec Type: You may have different codec options depending on camera models. If the
selected camera supports dual streaming, the live view codec and recording codec can be set
differently.
 Resolution: You may select the different resolutions for live view and recording.
5. Click Apply to add the IP camera to the IP Device List.
6. To connect the added camera, click the box besides the ID column. Upon successful connection,
the Status icon shows green, with the video resolution and bit rate being displayed in the
correspondent columns.
Figure 2-4
7. To change the number of the camera, click the camera’s ID and select a desired number. Note this
function is only available for the disconnected cameras.
79