Quick Installation Guide

Camera Setup
3
Chapter 3 Camera Setup
3.1 Configuring Recording Settings
After the cameras are added, you can configure the recording settings. Under Home ,
select Toolbar
, click Configure , select System Configure and click Record
Setting. This dialog box appears.
Figure 3-
. Enable the Recycle function. The oldest events will be deleted when the free space of
nfigure. Hold the Shift key to select multiple cameras if
cord Type, select Round-the-clock or Motion Detect.
1
1
the storage drive falls below the recycle threshold specified in step 4 below. This setting
will be applied to all cameras.
2. Select the camera you want to co
needed.
3. Under Re
13