User Manual

Video Analysis
3
2. From the Video Analysis drop-down list, select Object Index/Monitor Setup, select the desired
cameras, and then click Setting. This dialog box appears.
Figure 3-11
4. Select one camera from the drop-down list and configure the following.
 Mask Filter: Use the mouse to outline a mask area where motions will be ignored.
 Set Location: Click the button to assign a path to save the file.
 Keep Days: Select the option and specify the days to store the files, from 1 day to 999 days.
 Recycle: Select this option for GV-VMS to recycle the camera’s storage when the free space
is less than 500 MB. When both Keep Days and Recycle are selected, the system applies
whichever condition that comes first. For example, if storage space is lower than what is
required to hold the days of data specified in Keep Days, recycle comes first.
 Never Recycle: With the option selected, the event files of object index, face detection and
snapshot will not be recycled when the recycle threshold is reached.
 Noise Tolerance: Use the slider to adjust the level. The higher the level, the more tolerant
the system is to video noise.
5. Click OK to apply the settings.
107