User Manual

122
2. From the Video Analysis drop-down list, select Face Count, select the desired cameras, and then
click Setting. This dialog box appears.
Figure 3-25
3. Under Camera Selection, select a camera from the drop-down list to be configured.
4. The following configurations are available:
[Definition]
 Mask Region: Use the mouse to outline a mask area where motion will be ignored.
 Detected Face Size: You can adjust the Minimum Face Size and the Maximum Face
Size to instruct the system to only detect faces within that size range. Pause the live
image by clicking the
button before you can adjust the size.
[Setting]
 Alarm Type
~ Face Count: Counts the number of faces. The counting results are only available
on the GV-Web Report. To connect to the GV-Web Report, see the Saves
counting results to GV-Web Report option below.
~ Mask Filter: Detects faces and invokes a computer alarm or triggers an output
device.
~ Mask Filter (Inverse Alarm): Invokes a computer alarm or triggers an output device
when the system is unable to detect a face after the number of seconds specified in
the Detection Interval.