User Manual
Table Of Contents
- Important Notes
- Contents
- Chapter 2
- Chapter 3
- Video Analysis
- 3.1 Object Counting and Intrusion Alarm
- 3.2 Object Index
- 3.3 Automatic Video Snapshots
- 3.4 Face Detection
- 3.5 Face Count
- 3.6 Privacy Mask Protection
- 3.7 Panorama View
- 3.8 Video Defogging
- 3.9 Video Stabilization
- 3.10 Wide Angle Lens Dewarping
- 3.11 Advanced Motion Detection
- 3.12 Crowd Detection
- 3.13 Advanced Scene Change Detection
- 3.14 Advanced Unattended Object Detection
- 3.15 Advanced Missing Object Detection
- 3.16 Text Overlay
- 3.17 Fisheye View
- 3.18 Specifications
- Video Analysis
- Chapter 4
- Chapter 5
- Chapter 6
- Chapter 7
- Chapter 8
- Chapter 9
- Useful Utilities
- 9.1 Dynamic DNS
- 9.2 Watermark Viewer
- 9.3 Windows Lockup
- 9.4 Authentication Server
- 9.5 Fast Backup and Restore
- 9.6 Bandwidth Control Application
- 9.7 Language Setting
- 9.8 Skype Video Utility
- 9.9 GV-SDSyncCard Utility
- Useful Utilities
Video Analysis
3
Reset at: Type a counting reset time between 0 and 23. For example, if you type 23, the
number of faces counted will become zero at 23 o’clock daily.
Sensitivity: Adjust the detection sensitivity by moving the slider. The higher the value the
more sensitive the system is to motion. The default value is 3.
Detection Interval:
~ When Mask Filter and Enable Upon Input Trigger are both selected, the
Detection Interval slider specifies the number of seconds you want the system to
detect faces when the input device is triggered. For example, the input device is a
card reader and a door lock has been set up as the output device. After you swipe
the card triggering the reader, the system starts to detect the face for the duration
specified. If the face is detected within the duration, the door will be open; otherwise
the door will remain locked.
~ When Mask Filter (Inverse Alarm) is selected, the system will attempt to detect the
faces for the duration specified for Detection Interval. For example, if you set the
interval to 15 seconds, the alarm will be triggered if the system cannot detect any
faces within 15 seconds after motion is detected.
[Option]
Enable upon input trigger: The system will begin detecting only when the input device
is triggered. Assign an input module and pin number for the device.
Saves counting results to GV-Web Report: Saves the face counting results to the
GV-Web Report. When the option is selected, the dialog box below appears. Type the
Domain Name or IP Address, Port, User Name, and Password of the GV-Web Report.
After settings, click the Test button to see if the connection succeeds.
Figure 3-26
Invoke Alarm: Activates the computer sound alarm when faces are detected under
Mask Filter or when the system is unable to detect faces under Mask Filter (Inverse
Alarm). Click the […] button to designate a sound file to be the alarm sound.
Output Module: Activates the output device when faces are detected under Mask Filter
or when the system is unable to detect faces under Mask Filter (Inverse Alarm). Assign
an output module and pin number for the device.
123