User Manual

Useful Utilities
9
9.4.7 Connecting GV-VMS to the Server
To configure the GV-VMS in order to access the Authentication Server remotely through a
network connection, follow the steps below.
1. On the main screen of GV-VMS, click User
, select Password Setup and click
Remote Authentication Setup. The Setup Remote Authentication Server dialog box
appears.
Figure 9-26
2. Select Use Remote Authentication and select any of the following options.
[When Remote Authentication Server Off-line]
 Allow local supervisor to stop use Remote Authentication System: Allow the
local supervisor to stop the Authentication application when the connection with the
Authentication Server fails. Note if the option is disabled and the connection with the
Authentication Server fails, the local supervisor will not be able to log into the
GV-VMS, and the dialog box will not be accessible until the connection resumes.
 Allow user to use local account login remote application: Allow local users to
access remote applications with their previous password and ID settings when the
connection with the Authentication Server fails.
 Login with authentication server backup account: Keep using password settings
created on the Authentication Server even though the connection with the server fails.
327