User Manual

330
9.4.8 Remote Access from Control Center and Remote E-Map
The Authentication Server allows you to restrict users of E-Map Server and GV-Control
Center to access specific GV-VMS hosts and cameras only. Instead of connecting to GV-VMS
hosts directly, the user of E-Map Server and Control Center will connect to the Authentication
Server using the user account you created on the Authentication Server.
You must first set up remote authentication on E-Map Server and GV-Control Center. After
the E-Map Server and GV-Control Center are connected to the Authentication Server, the
user will be prompted to log in with the user ID and password you created on the
Authentication Server. Once the user logs in, a list of GV-VMS hosts authorized to the user
account will be displayed, and the user will be able to view the assigned cameras.
Setting up Authentication Server
You need to create and arrange E-Map Servers and Control Servers under their separate
lists on the Authentication Server window (Figure 9-14).
1. In the Client List field, click the E-Map Server List or Control Center List and click the
Add A Client button (No. 2, Figure 9-14). The Client Information dialog box appears.
2. Type the name and information of the E-Map Server or Control Center. The name does
not need to match the location name of the E-Map Server or Control Center.
3. Click OK to add the E-Map Server or Control Center.
Accessing from E-Map Server
The E-Map Server can access the user account setting of the Authentication Server.
1. Run the E-Map Server. For details, see E-Map Sever in Chapter 8.