User Manual
Table Of Contents
- Important Notes
- Contents
- Chapter 2
- Chapter 3
- Video Analysis
- 3.1 Object Counting and Intrusion Alarm
- 3.2 Object Index
- 3.3 Automatic Video Snapshots
- 3.4 Face Detection
- 3.5 Face Count
- 3.6 Privacy Mask Protection
- 3.7 Panorama View
- 3.8 Video Defogging
- 3.9 Video Stabilization
- 3.10 Wide Angle Lens Dewarping
- 3.11 Advanced Motion Detection
- 3.12 Crowd Detection
- 3.13 Advanced Scene Change Detection
- 3.14 Advanced Unattended Object Detection
- 3.15 Advanced Missing Object Detection
- 3.16 Text Overlay
- 3.17 Fisheye View
- 3.18 Specifications
- Video Analysis
- Chapter 4
- Chapter 5
- Chapter 6
- Chapter 7
- Chapter 8
- Chapter 9
- Useful Utilities
- 9.1 Dynamic DNS
- 9.2 Watermark Viewer
- 9.3 Windows Lockup
- 9.4 Authentication Server
- 9.5 Fast Backup and Restore
- 9.6 Bandwidth Control Application
- 9.7 Language Setting
- 9.8 Skype Video Utility
- 9.9 GV-SDSyncCard Utility
- Useful Utilities
Useful Utilities
9
9.6.7 Block List Setup
Two types of block lists are provided to restrict the access to a WebCam server: permitting
and denying a specified range of IP address to establish the connection. Note that only one
type of block list can be used at a time.
1. Click Configure on the menu bar and select IP White / Black List Setup. A dialog box
prompts for you to select a host.
2. In the IP White / Black List Setup dialog box, select the desired WebCam server and click
OK. This dialog box appears.
Figure 9-44
3. Select a desired type of block list and click Add to define the IP addresses.
Enable IP White list: Allow the defined range of IP addresses to establish the
connection to the WebCam Server.
Enable IP Black list: Prohibit the defined range of IP addresses from establishing the
connection to the WebCam Server.
4. Click OK to apply the settings.
345