User Manual

58
4. Click Next. This dialog box appears.
Figure 1-49
5. When the Include button
is selected, you will start with an empty timeline. Click the Add
button and drag across the timeline when you want the function to be enabled. Use the
Erase button when you want disable the function.
Figure 1-50
6. You can also click the Exclude button
and start with everything disabled. The Add button
is now used for disabling the function instead and the Erase button is now used for
enabling the function.
7. Four categories are available on the left.
ly
ll
on General Event and Urgent Event, refer to Configuring General Setting,
sitivity level selected in
on Detection Setup
(Fig 1-16) will be triggered upon motion during the highlighted times.
 Camera:
 Round-the-Clock Recording: When highlighting the timeline, you can choose to app
the frame rate settings for General Event or Urgent Event. The settings here wi
override the settings in Record Setting once schedule monitoring is started. For
information
Chapter 2.
 Motion Detection Recording: When highlighting the timeline, you can apply different
motion sensitivity levels. If you select User Define, the sen
Advanced Motion Detection Setup (Fig 1-16) will be used.
 Alarm Trigger The Event Trigger methods selected in Advanced Moti