User Manual
Table Of Contents
- Important Notes
- Contents
- Chapter 2
- Chapter 3
- Video Analysis
- 3.1 Object Counting and Intrusion Alarm
- 3.2 Object Index
- 3.3 Automatic Video Snapshots
- 3.4 Face Detection
- 3.5 Face Count
- 3.6 Privacy Mask Protection
- 3.7 Panorama View
- 3.8 Video Defogging
- 3.9 Video Stabilization
- 3.10 Wide Angle Lens Dewarping
- 3.11 Advanced Motion Detection
- 3.12 Crowd Detection
- 3.13 Advanced Scene Change Detection
- 3.14 Advanced Unattended Object Detection
- 3.15 Advanced Missing Object Detection
- 3.16 Text Overlay
- 3.17 Fisheye View
- 3.18 Specifications
- Video Analysis
- Chapter 4
- Chapter 5
- Chapter 6
- Chapter 7
- Chapter 8
- Chapter 9
- Useful Utilities
- 9.1 Dynamic DNS
- 9.2 Watermark Viewer
- 9.3 Windows Lockup
- 9.4 Authentication Server
- 9.5 Fast Backup and Restore
- 9.6 Bandwidth Control Application
- 9.7 Language Setting
- 9.8 Skype Video Utility
- 9.9 GV-SDSyncCard Utility
- Useful Utilities
Configuring Main System
1
1.11.1 Accessing PTZ Control Panel and Auto Functions
After PTZ Control is enabled, move the cursor to the live view to see the PTZ control panel. Note that
the PTZ control panel is hidden when live view resolution is less than 240 x 180.
Focus In / Out
Zoom In / Out
Home
Figure 1-62
In the PTZ control panel, click the Home button
to access the advanced PTZ functions below. The
options available may differ depending on the model of your PTZ camera.
Home: Returns the camera to Home position.
Iris Open / Close: Adjusts the camera iris. The iris Control buttons are only available for GV-IP
Speed Dome.
Auto Focus: Adjusts the camera focus according to the subject.
Auto Iris: Adjusts the iris opening according to amount of light in the environment.
Auto Go: Allows you to enable Cruise, AutoPan, Sequence and Tour functions. You can click
Stop Auto Go to stop the Auto function you have enabled.
Auto Set: Allows you to set up AutoPan and Cruise functions. See the section below for details.
Preset Go: Moves the PTZ to a preset point by clicking the preset number.
Preset Set: Allows you to configure up to 256 PTZ preset points. Move the camera to the position
where you want set a preset point and then select a preset point number here.
To see how to set up the Sequence and Tour function, consult the manual of the connected PTZ
model.
71