Quick Installation Guide

Live View
31
4
4.4 Setting Up PTZ Cameras
If you have added a PTZ camera, follow the steps below to enable PTZ functions.
1. Move the cursor to the camera live view and click the Tools button
.
2. Click PTZ Control to enable PTZ function.
3. Move the cursor to the live view to see the PTZ control panel.
Figure 4-15
Note: The PTZ control panel is hidden when live view resolution is less than 240 x 180.
4. In the PTZ control panel, you can click the Home button
to access advanced PTZ
functions such as Preset Go, Cruise, Sequence and Tour.
5. In the Content List, right-click a PTZ camera and select PTZ Setup to configure PTZ
speed and PTZ Idle Protection functions.
For details on the PTZ functions, see PTZ Camera, Chapter 1, GV-VMS User Manual.