User Manual

90
2.3 Connection through RTSP, ONVIF & PSIA
You can add an IP camera to the GV-VMS by using the RTSP (Real Time Streaming Protocol), ONVIF
(Open Network Video Interface Forum) and PSIA (Physical Security Interoperability Alliance) if the
protocol is supported by your IP camera. This is useful to set up an IP camera which is not on the list of
Supported IP Devices (see http://www.geovision.com.tw/english/4_21.asp
).
1. Click Home
, select Toolbar , click Configure and select Camera Install.
2. Click Add Camera
to manually add an IP camera. This dialog box appears.
Figure 2-14
3. Type the IP address, username and password of the IP camera. Modify the default HTTP port if
necessary.
4. Select Protocol from the Brand drop-down list.
5. Select the protocol that is supported by your IP camera from the Device drop-down list.
Figure 2-15