User Manual
Table Of Contents
- Important Notes
- Contents
- Chapter 2
- Chapter 3
- Video Analysis
- 3.1 Object Counting and Intrusion Alarm
- 3.2 Object Index
- 3.3 Automatic Video Snapshots
- 3.4 Face Detection
- 3.5 Face Count
- 3.6 Privacy Mask Protection
- 3.7 Panorama View
- 3.8 Video Defogging
- 3.9 Video Stabilization
- 3.10 Wide Angle Lens Dewarping
- 3.11 Advanced Motion Detection
- 3.12 Crowd Detection
- 3.13 Advanced Scene Change Detection
- 3.14 Advanced Unattended Object Detection
- 3.15 Advanced Missing Object Detection
- 3.16 Text Overlay
- 3.17 Fisheye View
- 3.18 Specifications
- Video Analysis
- Chapter 4
- Chapter 5
- Chapter 6
- Chapter 7
- Chapter 8
- Chapter 9
- Useful Utilities
- 9.1 Dynamic DNS
- 9.2 Watermark Viewer
- 9.3 Windows Lockup
- 9.4 Authentication Server
- 9.5 Fast Backup and Restore
- 9.6 Bandwidth Control Application
- 9.7 Language Setting
- 9.8 Skype Video Utility
- 9.9 GV-SDSyncCard Utility
- Useful Utilities
98
2. From the Video Analysis drop-down list, select Counter/Intrusion Alarm Setting, select the
desired cameras, and click Setting. This page appears.
Figure 3-2
3. In the Choose Camera section, select a camera from the drop-down list for setup.
4. Select Enable Setting to define the criteria for the counter.
Define Detection Zones: Select this option to define the detection zones.
a. On the live view, draw at least two boxes to mark the in and out detection zones.
Each detection zone is numbered. Use these buttons to edit the detection zones:
Name Button Function
Reverse
Click this button to flip-flop the detection zone.
Switch
Click this button to switch to another detection zone and
then use the
button to delete or the button to edit.
Delete
Click this button to delete the detection zone.
Direction
Click this button to configure the in and out directions. See
step 2b for details.