User Manual

Video Analysis
3
5. To stitch the two images together, click on a significant point in the Reference image and then look
for the same point in the Source image. A dialog box of point selection will prompt you to confirm.
You need to set up 3 points for stitching.
Figure 3-32
Note: For the best result, position the points in the overlapping areas on both images. Avoid placing
the points in a cluster or lining them up straight.
6. The resulting image is displayed in the Preview window. If satisfied with the result, click OK to exit
the setup dialog box. If not, re-enter the 3 points for stitching.
7. If you want to stitch a third image or more, click Manual Setting and repeat Steps 3 to 5 multiple
times.
8. When you finish stitching images, click the Save Before Exit button (No.6, Figure 3-30) to save
the created panorama view before exiting the Panorama View Setup dialog box.
Note: The resolution of the images to be stitched will be reduced to 320 x 240. A panorama view
has a resolution limit of 1920 x 1080. Once the limit is reached, you cannot stitch more images to
the created panorama view.
9. This panorama view is saved to the Panorama category in the Content List.
Figure 3-33
131