User Manual
Table Of Contents
- Important Notes
- Contents
- Chapter 2
- Chapter 3
- Video Analysis
- 3.1 Object Counting and Intrusion Alarm
- 3.2 Object Index
- 3.3 Automatic Video Snapshots
- 3.4 Face Detection
- 3.5 Face Count
- 3.6 Privacy Mask Protection
- 3.7 Panorama View
- 3.8 Video Defogging
- 3.9 Video Stabilization
- 3.10 Wide Angle Lens Dewarping
- 3.11 Advanced Motion Detection
- 3.12 Crowd Detection
- 3.13 Advanced Scene Change Detection
- 3.14 Advanced Unattended Object Detection
- 3.15 Advanced Missing Object Detection
- 3.16 Text Overlay
- 3.17 Fisheye View
- 3.18 Specifications
- Video Analysis
- Chapter 4
- Chapter 5
- Chapter 6
- Chapter 7
- Chapter 8
- Chapter 9
- Useful Utilities
- 9.1 Dynamic DNS
- 9.2 Watermark Viewer
- 9.3 Windows Lockup
- 9.4 Authentication Server
- 9.5 Fast Backup and Restore
- 9.6 Bandwidth Control Application
- 9.7 Language Setting
- 9.8 Skype Video Utility
- 9.9 GV-SDSyncCard Utility
- Useful Utilities
258
7.3.5 I/O Control
The I/O control panel shows the I/O status and alarm event. Additionally, you can force output, as well
as enable and disable I/O devices to the remote GV-VMS. Click the I/O Control button at the right of
the live view to bring out the I/O control panel.
I/O Control Panel
Single
View
Viewer
Figure 7-24 I/O Control
The alarm status is shows the triggered inputs. Clicking the Reset button will clear the alarm list.
To force trigger an output device, click the Enable button, highlight an output and then click the Output
button. The Timer functions the same as in the PTZ control panel. Each user will be given 60 seconds
of control time while the supervisor has 999 seconds. Clicking the Stop button will stop the operation
and turn over the control privilege to the next user waiting online.
If you want to enable or disable I/O devices to the remote GV-VMS, click the Enable/Disable I/O
button. Note that the Enable Remote Control option must be enabled in the WebCam Server Setup
dialog box (Figure 7-4)