User Manual

IP Camera Setup
2
2.1.2 Scanning Camera
You can add camera by scanning the cameras in the LAN.
1. Click Scan Camera
.
2. In the Scan Camera dialog box, click Start Scan. The IP devices detected are displayed.
Figure 2-5
3. Double-click the IP device you wish to connect. This dialog box appears.
Figure 2-6
4. Type the username and password of the IP device and click OK. Figure 2-3 appears.
5. Click Apply. The IP camera is added to the IP Device List and automatically enabled for
connection (Figure 2-1).
81