Quick Start Guide
Table Of Contents
- Contents
- Important Note for Maintaining Power Supply
- GV-AS Controller Quick Start Guide
- 1. Basic Setup for GV-AS100 / 1010 / 110 / 1110 / 120
- 2. Physical Wiring for GV-AS210 / 2110 / 2120 / 410 / 4110 / 810 / 8110 and GV-EV48
- 3. Accessing the Web Interface of the GV-AS Controllers
- 4. Setting GV-AS Controller on GV-ASManager
- 5. Optional Devices for GV-AS100 / 110 / 120
October 29, 2015
10
5. Optional Devices for GV-AS100 / 110 / 120
To access GV-AS100 / 110 / 120 on a network, an optional device GV-ASBox or GV-ASNet
is required. GV-ASBox also supports connection with additional input devices, output devices
and readers through Wiegand interface and RS-485 interface. GV-ASNet supports additional
readers through RS-485 connection.
You will need to first complete the physical wiring of GV-ASBox or GV-ASNet before
accessing the Web interface. After the controller is installed on a network, GV-AS100 / 110 /
120 can also connect with GV-ASManager for advanced settings. Refer to 4. Setting GV-AS
Controller on GV-ASManager for details.