Quick Start Guide
Table Of Contents
- Contents
- Important Note for Maintaining Power Supply
- GV-AS Controller Quick Start Guide
- 1. Basic Setup for GV-AS100 / 1010 / 110 / 1110 / 120
- 2. Physical Wiring for GV-AS210 / 2110 / 2120 / 410 / 4110 / 810 / 8110 and GV-EV48
- 3. Accessing the Web Interface of the GV-AS Controllers
- 4. Setting GV-AS Controller on GV-ASManager
- 5. Optional Devices for GV-AS100 / 110 / 120
October 29, 2015
1
GV-AS Controller Quick Start Guide
This guide lists the basic steps required to set up a GV-AS Controller. For detailed
instructions, refer to the section number listed below each step.
1. Basic Setup for GV-AS100 / 1010 / 110 / 1110 / 120
This section covers the basic settings required to start running GV-AS100 / 1010 / 110 / 1110
/ 120. For more settings on GV-AS100 / 110 / 120, refer to 5. Optional Devices for GV-AS100
/ 110 / 120. The section numbers listed here refers to the GV-AS Controller User Manual.