Quick Start Guide
Table Of Contents
- Caution
- Safety Notice
- Options
- Note for Adjusting Focus and Zoom
- Note for Installing Camera Outdoor
- Note for Closing the Bullet Camera Cover
- Note for Silica Gel Bags
- Note for Waterproofing Failures
- Note for Recording
- Chapter 1 Bullet Camera (Part I)
- Chapter 2 Bullet Camera (Part II)
- Chapter 3 Bullet Camera (Part III)
- Chapter 4 Ultra Bullet Camera
- Chapter 5 Target Bullet Camera (Part I)
- Chapter 6 Target Bullet Camera (Part II)
- Chapter 7 Target Bullet Camera (Part III)
- Chapter 8 Accessing the Camera
- Chapter 9 The Web Interface
- Chapter 10 Upgrading System Firmware
Bullet Camera (Part II)
2
To
access the following interface, remove the camera base using the
supplied torx wrench.
1
2 3 4 5
Figure 2-4
No. Name Description
1 LAN / PoE Connects to a 10/100 Ethernet or PoE.
2 Audio In Connects a microphone for audio input.
3 Audio Out Connects a speaker for audio output.
4 I/O Terminal Block
Connects to I/O devices. For details, see
I/O Terminal, 2.4 Connecting the Camera.
5 DC 12V Port Connects to power.
29