Quick Start Guide
Table Of Contents
- Caution
- Safety Notice
- Options
- Note for Adjusting Focus and Zoom
- Note for Installing Camera Outdoor
- Note for Closing the Bullet Camera Cover
- Note for Silica Gel Bags
- Note for Waterproofing Failures
- Note for Recording
- Chapter 1 Bullet Camera (Part I)
- Chapter 2 Bullet Camera (Part II)
- Chapter 3 Bullet Camera (Part III)
- Chapter 4 Ultra Bullet Camera
- Chapter 5 Target Bullet Camera (Part I)
- Chapter 6 Target Bullet Camera (Part II)
- Chapter 7 Target Bullet Camera (Part III)
- Chapter 8 Accessing the Camera
- Chapter 9 The Web Interface
- Chapter 10 Upgrading System Firmware
4.2 Overview
Panel
1
2
3
4
5
Figure 4-1
No. Name Description
1
Power & I/O
Connector
Connects to the data cable. For details, see
4.3.2 Connecting the Camera.
Res
ets all configurations to factory default. For
details, see 4.4 Loading Factory Default.
2 Default Button
3 LAN / PoE Cable Connects to a 10/100 Ethernet or PoE.
4
Memory Card
Slot
Receives a micro SD card (SD/SDHC, version
2.0 only, Class 10).
5 Silica gel bag Desiccant that keeps the camera housing dry.
58