Quick Start Guide

Box Camera
9
1
4. Optionally connect a monitor using a Video Out wire. Enable this
function by selecting your signal format at the TV Out field on the Web
interface. See 4.1.1 Video Settings, GV-IPCam Firmware Manual.
5. Optionally connect to input / output devices or an infrared illuminator.
For details, see 1.4.2 Infrared Illuminator and 1.5 I/O Terminal Block.
6. Connect power using one of the following methods:
 plugging the power adapter to the power port.
 using the Power over Ethernet (PoE) function and the power will
be provided over the network cable.
7. The status LED of the camera will be on.
8. You are ready to access the live view, adjust the image clarity and
configure the basics. See Chapter 4 Accessing the Camera.
Note: For details on limitations and requirements of the mini USB port,
refer to the Note for USB Storage and WiFi Adapter at the beginning of
this manual.