Quick Start Guide

1. Optionally connect a speaker (green) and an external microphone

(pink).

2. Optionally connect a monitor using a Video Out wire. Enable this

function by selecting your signal format at the TV Out field on the

Web interface. See 4.1.1 Video Settings, GV-IPCam Firmware

Manual.

3. Connect the camera to a GV-PA482 PoE Adapter to supply power

and network access. For detailed instruction, see step 3 of For GV-

BX25010-E in the next section of Chapter 2.

4. The status LED of the camera will be on.

5. You are ready to access the live view.