Quick Start Guide

4.3 Adjusting Image Clarity

You can adjust the image clarity using the GV-IP Device Utility. Make sure

that you have connected your GV-IPCAM to the network and install the

GV-IP Device Utility program under the same LAN.

1. Make sure you have downloaded and installed GV-IP Device Utility

from the company website

2. On the GV-IP Utility window, click the

button to search for the IP

devices connected in the same LAN. Click the IP Address of the

camera you desire. A drop-down list appears.

3. Select Focus Value. The Login dialog box appears.

4. Type the user name and password of the camera selected. The

default is admin for both user name and password. This window

appears.

Figure 4-5

5. Adjust the Zoom Screw and the Focus Screw of the camera slowly

until the focus value reaches the maximum.