Quick Start Guide
Table Of Contents
- Contents
- Important Note for Maintaining Power Supply
- GV-AS Controller Quick Start Guide
- 1. Basic Setup for GV-AS100 / 1010 / 110 / 1110 / 120
- 2. Physical Wiring for GV-AS210 / 2110 / 2120 / 410 / 4110 / 810 / 8110 and GV-EV48
- 3. Accessing the Web Interface of the GV-AS Controllers
- 4. Setting GV-AS Controller on GV-ASManager
- 5. Optional Devices for GV-AS100 / 110 / 120
October 29, 2015
4
1.3 GV-AS120
3.2.1 Connecting a Wiegand Reader
Connect card readers (Optional)
Connect AS120 to a reader through Wiegand
interface.
Connect input devices
Connect AS120 to input devices (Ex: a push
button to exit).
3.2.2 Connecting Input Devices
Connect output devices
Connect AS120 to output devices (Ex: a door
lock).
3.2.3 Connecting Output Devices
Connect to PC
Connect AS120 to a computer through RS485
connection or network connection.
Connect to Power
Connect AS120 to power using the supplied 12V
DC adaptor.
3.2.5 Connecting the Power
RS485 Connection
3.2.4.A RS-485 Connection
Network Connection
3.2.4.B Network Connection
Add and delete cards
Create an Enroll Card and a Delete Card to add
and delete cards.
3.3 Programming Mode
GV-AS120