User Manual
Table Of Contents
- Welcome
- Important Notes for Maintaining Power Supply
- Elevator Control
- Optional Devices
- Installation Considerations
- Firmware and Software Compatibility
- Definition
- 1. GV-AS100 / 1010 Controller
- 1.1 Introduction
- 1.2 Installation
- 1.3 Programming Mode
- 1.4 Web-Based Configurations
- 1.5 GV-AS100 / 1010 Specifications
- 2. GV-AS110 / 1110 Controller
- 3. GV-AS120 Controller
- 4. GV-AS210 / 2110 / 2120 Controller
- 5. GV-AS410 / 4110 / 810 / 8110 Controller
- 6. GV-EV48 Controller
- 7. Installing on a Network
- 8. The Web Interface
- 9. Optional Devices
- 9.1 Optional GV-ASBox
- 9.1.1 Main Features
- 9.1.2 Packing List
- 9.1.3 GV-ASBox Board Layout
- 9.1.4 Installation
- 9.1.5 GV-ASBox Specifications
- 9.2 Optional GV-ASNet
- 9.3 Web Interface through Optional Devices
- 9.1 Optional GV-ASBox
- 10. Troubleshooting
- Appendix
GV-AS210 / 2110 / 2120 Controller
91
4
4.5 GV-AS210 / AS2110 / AS2120 Specifications
GV-AS210 GV-AS2110 GV-AS2120
CPU 32-bit ARM7TDMI
Number of User Cards 40,000 cards
Event Buffer 1,000,000 events and log data
Power 12V DC, 3A
12V DC, 3A / PoE+
(IEEE 802.3at, 25.5W)
RS-485 Interface
1 RS-485 interface only for GV-Readers and GV-GF Fingerprint
Readers (max. 8 readers)
4 Wiegand interfaces, 26 ~ 64 bit format
Wiegand Interface
12V DC power supply, 200mA
TCP/IP Interface 1 TCP/IP interface for GeoVision network readers
Communication Protocol TCP/IP
Battery Built-in battery Replaceable button cell
Input 8 inputs, dry contact, NO/NC
Output 8 relay outputs (30V DC, 3A; 110V AC ~ 250V AC, 3A)
Operating Temperature 0 ~ 65°C / 32 ~ 149°F
Operating Humidity 10% ~ 90% RH (non-condensing)
Dimensions (W x H x D) 210 x 204 x 46.6 mm / 8.27 x 8.03 x 1.83 in (case included)
Weight 810 g / 1.79 lb (case included)
Certification CE, FCC, RoHS
All specifications are subject to change without notice.