User Manual

xi
Optional Devices
Optional devices can expand the capabilities and versatilities of your GV-AS / GV-EV
Controllers. Consult your sales representative for more information.
GV-Reader
1251
GV-Reader 1251 is a card reader that uses a 125 kHz frequency. It has
both Wiegand and RS-485 outputs that can be connected to any standard
access control panel.
GV-RK1352
GV-RK1352 is a card reader with keypad that uses a 13.56 MHz
frequency. The reader has both Wiegand and RS-485 outputs that can be
connected to any standard access control panel.
GV-R1352
GV-R1352 is a card reader that uses a 13.56 MHz frequency. The reader
has both Wiegand and RS-485 outputs that can be connected to any
standard access control panel.
GV-GF
Fingerprint
Reader
The reader supports three operation modes: Fingerprint Only, Fingerprint +
Card and Card Only. In Fingerprint Only mode, the fingerprints are enrolled
through GV-ASManager. In Fingerprint + Card mode, the fingerprint
templates are stored on the user card. In Card Only mode, the users only
need to swipe the card to be granted access. Readers with optical and
capacitance sensors are available.
GV-CR420
GV-CR420 is a card reader with a built-in 4MP wide angle IP camera. The
card reader recognizes identification cards and transmits live view through
network connection.
GV-DFR1352
The GV-DFR1352 is a card reader designed to be installed on the door
frame for recognizing identification cards. Featured with the Wiegand and
RS-485 outputs, the unit can be connected to any standard access control
panel.
GV-ASBox
Only works with GV-AS100 / 110 / 120. The device can add Network
function, 1 Wiegand interface, 8 additional inputs and outputs to GV-
AS100, GV-AS110 and GV-AS120.
GV-ASNet
Only works with GV-AS100 / 110 / 120. This device can add Network
function to GV-AS100, GV-AS110 and GV-AS120.