User Manual
Table Of Contents
- Welcome
- Important Notes for Maintaining Power Supply
- Elevator Control
- Optional Devices
- Installation Considerations
- Firmware and Software Compatibility
- Definition
- 1. GV-AS100 / 1010 Controller
- 1.1 Introduction
- 1.2 Installation
- 1.3 Programming Mode
- 1.4 Web-Based Configurations
- 1.5 GV-AS100 / 1010 Specifications
- 2. GV-AS110 / 1110 Controller
- 3. GV-AS120 Controller
- 4. GV-AS210 / 2110 / 2120 Controller
- 5. GV-AS410 / 4110 / 810 / 8110 Controller
- 6. GV-EV48 Controller
- 7. Installing on a Network
- 8. The Web Interface
- 9. Optional Devices
- 9.1 Optional GV-ASBox
- 9.1.1 Main Features
- 9.1.2 Packing List
- 9.1.3 GV-ASBox Board Layout
- 9.1.4 Installation
- 9.1.5 GV-ASBox Specifications
- 9.2 Optional GV-ASNet
- 9.3 Web Interface through Optional Devices
- 9.1 Optional GV-ASBox
- 10. Troubleshooting
- Appendix
xii
GV-Hub
Only works with GV-AS100 / 110 / 120. GV-Hub can convert the standard
RS-232 signal of up to 4 controllers to RS-485, allowing the controllers to
connect to computers.
GV-COM
Only works with GV-AS100 / 110 / 120. GV-COM can convert the
standard RS-232 signal of one controller to RS-485, allowing the controller
to connect to a computer.
GV-Net / IO
Card
Only works with GV-AS100 / 110 / 120. GV-Net / IO Card can convert the
standard RS-232 signal of one controller to RS-485, allowing the controller
to connect to a computer.
GV-AS410 /
4110 / 810 /
8110 Kit
Only available for GV-AS410 / 4110 / 810 / 8110. Includes a GV-AS410 /
4110 / 810 / 8110, a power adapter board, a power supply and a casing for
backup battery. The power supply provides power to the controller and up
to 8 output devices (12V, 0.9A per device).
Cabinet
Only available for GV-AS410 / 4110 / 810 / 8110 and GV-EV48. With the
cabinet, GV-AS / GV-EV Controllers can be mounted directly to a wall or
recessed into the wall. Two types of cabinet dimensions are available (W x
H x D):
• 383.5 x 443.5 x 112.2 mm / 15.1 x 17.5 x 4.4 in
• 300 x 420 x 86 mm / 11.8 x 16.5 x 3.4 in
GV-MountA900
Only available for GV-AS110 / 1110. GV-MountA900 is a mounting plate
that allows you to attach GV-AS110 / 1110 to a US single gang power box.
• Dimensions: 100 x 68 mm / 3.9 x 2.7 in
• Weight: 55 g / 0.12 lb
Push Button
Switch
The push button switch can be integrated with access control system,
allowing door exit by momentarily activating or deactivating the electric
locking device. Both American standard and European standard push
buttons are available.
GV-IB25 / 65 /
85 Infrared
Button
The GV-IB25 / 65 / 85 Infrared Button detects infrared movement within 3
to 12 cm and allows you to open the door with a wave of hand.
Electric Lock
Three types of electric locks are available: electromagnetic lock, electric
bolt and electric strike.
GV-AS ID Card
& GV-AS ID
Tag
GV-AS ID Cards and GV-AS ID Tags are ideal for business and residential
environment, where access control is important for security reasons. 125
kHz and 13.56 MHz cards and tags are available.