User Manual
Table Of Contents
- Welcome
- Important Notes for Maintaining Power Supply
- Elevator Control
- Optional Devices
- Installation Considerations
- Firmware and Software Compatibility
- Definition
- 1. GV-AS100 / 1010 Controller
- 1.1 Introduction
- 1.2 Installation
- 1.3 Programming Mode
- 1.4 Web-Based Configurations
- 1.5 GV-AS100 / 1010 Specifications
- 2. GV-AS110 / 1110 Controller
- 3. GV-AS120 Controller
- 4. GV-AS210 / 2110 / 2120 Controller
- 5. GV-AS410 / 4110 / 810 / 8110 Controller
- 6. GV-EV48 Controller
- 7. Installing on a Network
- 8. The Web Interface
- 9. Optional Devices
- 9.1 Optional GV-ASBox
- 9.1.1 Main Features
- 9.1.2 Packing List
- 9.1.3 GV-ASBox Board Layout
- 9.1.4 Installation
- 9.1.5 GV-ASBox Specifications
- 9.2 Optional GV-ASNet
- 9.3 Web Interface through Optional Devices
- 9.1 Optional GV-ASBox
- 10. Troubleshooting
- Appendix
Installing on a Network
131
7
2. In the Username field, type a name. Username can be up to 16 characters with the
choices of “a ~ z”, “0 ~9”, and “-”. Note that space or “-” cannot be used as the first
character.
3. In the Password filed, type a password. Passwords are case-sensitive and must be at
least 6 characters. Type the password again in the Re-type Password field for
confirmation.
4. In the Word Verification section, type the characters or numbers shown in the box. For
example, type i8UCY in the required field. Word Verification is not case-sensitive.
5. Click the Send button. When the registration is complete, this page will appear. The
Hostname is the domain name, consisting of the registered username and
“dipmap.com”, e.g. somerset01.dipmap.com.
Figure 7-9
Note: The registered username will be invalid when it is not used for one month.